Overview: Installation and Specifications for Retract-A-Gate
Easy to Install and Use (see Users Guides for full details):
1. Starting on one side of the opening with the bottom bracket, mount it approximately 8-10cm from the floor. Then affix the top bracket about 77.5cm off the floor. Repeat for the other side of the opening while ensuring the horizontal distances between both upper and lower brackets is identical, to maintain squareness.
2. Attach the safety gate to the brackets by snapping it into place
3. Pull the mesh to easily unroll it from the reel
4. To close the opening, simply connect the gate to the opposite brackets
5. The gate can be safely locked in place by pushing and turning the childproof locking feature
Specifications and Dimensions:
Complete Listing of Installation and Users Guides (in pdf format)
Retract-A-Gate’s reel is 97cm high and the mesh fabric is 86cm tall
Choose from two widths that extend up to 132cm or 183cm
Holds up to a push-out force of 100kg
Meets ASTM International certification standard for enclosures and gates (specification F1004-19)
The hardware-mounted style is safe and secure
Designed with children in mind – for infants and toddlers aged 6-24 months
Even with the hardware and gate installed, most doors can still be closed
Three colours available: White, Café and Black
Resistant to UV rays when used outdoors (for details, see our FAQ)
Tested and certified for top and bottom of stairs use by the Juvenile Products Manufacturing Association (JPMA)
The brackets are mounted at about 8cm and 77.5cm from the floor. The distance between opposite brackets on either side of the door frame must be the same
Bow Wow Barrier
The Bow Wow Barrier reel measures 89cm tall, and the mesh portion is 86cm tall by approximately 71cm wide
Same high-quality Retract-A-Gate mesh is used for the Bow Wow Barrier
Hardware mounted
Colours available: White and Café
Screws for door-mount brackets are 2.5cm and the screws for the wall-mount brackets are 5cm for the Bow Wow Barrier
Mounting brackets are installed at 8cm and 77.5cm from the floor. Like the Retract-A-Gate, the distance between brackets opposite each other must be the same
Adapter Kit for Stair Bannister
Included are one adapter and all necessary mounting materials: 4 straps and 8 screws, nuts and finishing washers
The adapter requires no screws in the spindle or post, attaching only with straps, and is heavy duty and weather-proof
Two sizes to choose from: 8cm wide x 3cm deep by 91cm tall OR 122cm tall
Will fit most wood or wrought iron spindles or stair posts
Straps are 81cm in length and will fit square posts up to 18cm
Wall Spacer Set
Contains 10 spacers with pre-formed holes for the screws
Measures 3mm thick, 6cm wide and 3cm high
Spacing of the pre-formed screw holes corresponds to the Mounting Bracket
Plasterboard and Drywall Anchor Kit
Complete kit contains two heavy-duty wallboard anchors made of steel, plus corresponding screws and finishing washers
The kit can be used on wallboard, drywall or plasterboard 9.5mm to 16mm thick
